Module Point of sale (TakePOS)
| Point of sale (TakePOS) | |
|---|---|
| Numero/ID of module | 50150 |
| User doc. of module | This page |
| Developer doc. of module | Module Point of sale TakePOS (developer) |
Introduction
This module transforms your Dolibarr into a Point Of Sale (POS). It is an advanced Point of Sale with plenty of supported features like:
- Parallel sales
- Bar-code reader compatibility
- Touch and Responsive interface
- Multi-terminal
- Multi-payment mode, multi-payment sessions
- Auto order by customer from a QR code
- Management of shops, bars or restaurant
Note that this module should be used to replace the older Module Point of sale (SimplePOS)
Installation
This module is included with the Dolibarr distribution, so there is no need to install it.
Configuration
To use this module, you must first enable it using an administrator account, via the menu option "Home - Setup - Modules".
Choose the tab where the module is listed. Then click on "Activate".
The module is now activated.
If a cog icon appears 
on module thumb or at end of the line of the module, click on it to access the setup page specific to the module.
Compatible Hardware
If you need to connect the TakePOS module with some external hardware, you may find information on some compatible hardware ont this page: https://takepos.com/hardware/
Example of hardware setup for receipt printers:
Printer linked to your local desktop
If you can print from your local computer (from your browser) on your printer receipt, you should be able to print takepos receipt with no setup. Takepos will open the receipt in a popup on your browser and the print option of your browser will also open so all you have to do will be to click on the Print button.
The printer <----lan/wan/usb---- Your local desktop computer and browser ----internet----> Dolibarr server
Life cycle / Business rules
|
|
Related videos